Ugrás a tartalomhoz
Leírás
Technical data
- Sensor
-
- Mono/Color
-
- Sensor type
-
- Shutter type
-
- Resolution
-
- Pixel size
-
- Exposure time
-
- Dark noise
-
- Saturation capacity
-
- Dynamic range
-
- Signal-to-noise ratio
-
- Quantum efficiency
-
- 52.5 % @ 465 nm
- 63.6 % @ 536 nm
- 60.4 % @ 631 nm
- 52.4 % @ 467 nm
- 63.7 % @ 533 nm
- 59.4 % @ 630 nm
- Image formats, interface frame rate max.
-
- Full Frame, 3200 × 2200 px, max. 174 fps
- Binning 2×2, 1600 × 1100 px, max. 208 fps
- Binning 2×1, 1600 × 2200 px, max. 208 fps
- Binning 1×2, 3200 × 1100 px, max. 208 fps
- Image formats, aquisition frame rate max. (Burst Mode)
-
- Full Frame, 3200 × 2200 px, max. 209 fps
- Pixel formats
-
- BayerRG8
- BayerRG10
- BayerRG12
- BayerRG12 Packed
- Mono8
- Mono10
- Mono12
- Mono12 Packed
- RGB8
- BGR8
- Analog controls
-
- Gain (0 … 48 dB)
- Offset (0 … 255 LSB 12 Bit)
- Color models
-
- Basic Functions
-
- Exposure
- Gain / Color Gain
- Trigger / Exposure Active (Flash)
- Binning 2×2
- Partial Scan
- Offset
- Free Running Mode (Live Image)
- Multi ROI
- Auto Functions
-
- Exposure Auto
- Gain Auto
- White Balance Auto
- Color Transformation Auto
- Image Pre-processing
-
- Image Flipping (X/Y)
- Color Processing (RGB, BGR, Mono)
- Advanced 5×5 Color Processing (RGB, BGR, Mono)
- Color Enhancement (with optimized ColorTransformationMatrix)
- LUT / Gamma
- Shading Correction
- Edge Sharpening
- Noise Reduction
- Acquisition / Interface
-
- Burst Mode
- Adjustable Framerate
- Short Exposure Time Enable
- Device Link Throughput Limit
- Internal Image Buffer
- Synchronization
-
- Trigger sources
-
- Hardware
- Software
- ActionCommand
- Trigger delay
-
- 0 … 2 s, tracking and buffering of up to 256 trigger signals
- Process Synchronization
-
- Events
- Timer
- Trigger Delay
- Debouncer
- Counter
- Sequencer
- Trigger via Action CMD (GigE)
- Action CMD Request ID
- Trigger ID inside Chunk
- Additional Output Modes (e.g. Trigger Ready)
- PWM (PWM Duration / PWM Duty Cycle)
- Selectable Output format (e.g. Tri State, Push Pull)
- Chunk data inside transferred image
- Encoder support via Counter End trigger source
- 4 power outputs with up to 120 W (max. 48 V / 2.5 A)
- Time synchronization IEEE 1588
-
- IEEE 1588 / Master and Slave function
- IEEE 1588 / Scheduled Action CMD
- IEEE 1588 / Synchronized Acquisition Framerate
- Additional Functions
-
- User Set
- Integrated temperature sensor
- Readable additional information (e.g. sensor information)
- Save Custom Data
- Lens control
-
- Sequencer
-
- Automated control for series of images using different sets of parameters
- Sequencer parameter
-
- Exposure time
- gain factor
- output line
- ROI Offset x
- ROI Offset y
- Internal image buffer
-
- 1024 MB
- 78 images (Trigger Mode)
- 1 image (Free Running Mode)
- Data interface
-
- 10 Gigabit Ethernet, Transfer rate 10000 Mbits/sec, Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8-pol x-coded (SACC-CI-M12FS-8CON-L180-10G)
- Process interface
-
- M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
- Power supply
-
- Lens mount
-
- Width
-
- Height
-
- Depth
-
- Weight
-
- Material
-
- Voltage supply range +Vs
-
- 19.2 … 28.8 V DC (external power supply)
- Power consumption
-
- Approx. 12.3 W @ 24 VDC and 174 fps
- Operating temperature
-
- 0 … +60 ° @ T = measurement point
- Humidity
-
- 10 … 90 % (non-condensing)
- Protection class
-
- IP 40
- IP 54 (with mounted tube and cable)
- IP 65 (with mounted tube and cable)
- IP 67 (with mounted tube and cable)
- Lines
-
- 2 input lines
- 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
- RS232
- Conformity
-
- CE
- RoHS
- EAC
- KC (R-R-BkR-VLXT-71MI)
- UL recognized